Drying Time Tester, Model 415

The Drying Time Tester, Model 415, is intended for the determination of the degree of dryness of coatings in accordance with DIN 53 150 (modified Bandow-Wolff method).

PDF

Category:

Description

Drying Time Tester

Purpose and Application

The Drying Time Tester, Model 415, consists of an light alloy cylinder which is fixed to a stand. The
pressure spring integrated in the cylinder facilitates a plunger force of up to 250 N which is applied to the
coating in a perpendicular motion by way of a lever mechanism.
The clearance between the plunger and the base table can be set to the thickness of the test panel by
adjusting the lever bracket accordingly. Loading weights (20 g and 200 g) with a diameter of
24 mm are included in the scope of delivery for standardized loads of less than 2 kg (20 N).
To achieve a uniform distribution of the contact pressure a cylindrical soft rubber disk with a diameter
of 22 mm, a thickness of (5 ± 0.5) mm and a hardness of (50 ± 5) IRHD in accordance with DIN
ISO 48, is used.

 

Accessories

A glass tube Ballotini dispenser to measure degree of dryness 1 is available as accessory.

 

Please see leaflet for more info.

    Company name (obligatory)

    Your name (obligatory)

    Telephone number(obligatory)

    Your e-mail (obligatory)

    Your message

    GDPR Compliance


      Company name (obligatory)

      Your name (obligatory)

      Telephone number(obligatory)

      Your e-mail (obligatory)

      Your message

      GDPR Compliance