Quadruple Film Applicator, Model 360

A standard applicator with fixed gap heights.

PDF

Category:

Description

Quadruple Film Applicator, Model 360
(REFERENCE CLASS)

An easy to use standard applicator

This model is supplied with the blade at a fixed gap height, selected from a range between 15 and 2000 μm.
Model 360 is equipped with 4 working edges so that in this way several theoretical film thicknesses can be
applied with a single instrument. These models are corrosion resisting.

Reference Class:
All versions of Models 288 and 360 are supplied with a Manufacturer’s Certificate M in accordance with DIN 55350-18 that
includes among others the following informations: Gap heights (comparison of setting/actual values), evenness and
roughness of the working edge, product identification, test equipments used with calibration status, date, name of inspector.
For checking the film applicators maximum deviations of 5 μm/10 %/ 10 μm are fixed for gap heights in the
measuring range below 50 μm/50 – 100 μm/over 100 μm. The evenness/roughness should not exceed 3 μm/0.5 μm (Ra).

Available in 4 different widths; 13, 40, 60 and 90 mm.

Incl. case, with 4 different gap clearances of:

  • 30 μm
  • 60 μm
  • 90 μm
  • 120 μm

 


    Company name (obligatory)

    Your name (obligatory)

    Telephone number(obligatory)

    Your e-mail (obligatory)

    Your message


      Company name (obligatory)

      Your name (obligatory)

      Telephone number(obligatory)

      Your e-mail (obligatory)

      Your message