BT Integra Pack

The BT Integra Pack does not only test leakages but also burst, creep, creep-to-failure tests of packages.

PDF  Youtube-video

Beskrivning

BT Integra Pack

Seal Strength and Package Integrity Tester for Flexible Packages

The BT Integra Pack is a bench-top and high-resolution test instrument an user-friendly ease of operation. Electronic pressure and flow controls provide precise and repeatable test conditions, while automatic and high flow output allow testing of large porous packages.

  • A bench-top, high-resolution (0.001 psig) test instrument
  • A small footprint and user-friendly ease of operation
  • Electronic pressure and flow controls provide precise and repeatable test conditions
  • Automatic and high flow output allow testing of large porous packages
  • Applications cover a range of flexible or rigid, porous and non-porous, open or sealed packages.

 

Product details

  • Complies with standards for all commonly-used Seal Strength
    and Package Integrity tests (Burst, Creep, Creep-to-Failure
    and Leak Integrity)
  • Automatic Burst Test Mode
  • Results right out of the box, no lengthy setup
  • Senses package size during prefill
  • Manual Burst Test Mode
  • Multiple levels of control for optimal test results: Ramp Rate,
    Porous vs. Non-Porous Packages, Max/Min Acceptance Limits,
    Pressure Drop Sensitivity
  • High Performance
  • Higher Pressure Resolution (0.01 psi burst, 0.001 leak)
  • Automatic Regulator (fast pressure setting)
  • High Flow Capacity (up to 15 CFM)
  • Low Pressure Sensitivity at 5 InH2O
  • Advanced, user-defined smart interface compatible with
    USB keyboards, mice, bar code readers
  • Low Power Stand-by Mode for energy conservation
  • Graphical test plot display for leak, burst and creep tests
  • High Resolution Color LCD Display with Touchscreen
  • Standard and Metric units
  • Test data exporting to PC using Flash Driv

 

Automatic or Manual Parameter definition

The intelligent BT Integra-Pack will test any package in
automatic mode, with no need to input test parameters.
However, its sophisticated nature is combined with a manual
mode that lets the user input parameters such as ramp rate
control and back pressure drop sensitivity. This allows testing
of special confi gurations or types of packages or perform
specifi c research and data-gathering activities

 

Technical specifications

  • Power Supply Voltage: 230 V/50 Hz, 45 watts max
  • Air Supply Pressure: 60 to 120 psig (4.0 to 8.0 bar),
    Instrument Quality Air
  • Controls: Electronic Pressure Control, Illuminated
    Start/Stop Switch, Key Lock, Power ON/OFF Switch
  • Test Modes: Burst, Creep, Creep-to-Failure,
    Pressure Decay Leak
  • Display: Multicolor 5.7” QVGA, Touchscreen
  • Units of Measure: PSI / InH2O / mbar / kPa / InHg
  • Memory Capacity: 32 Mbytes, Expandable Memory,
    Internal SD Slot (optional)
  • Measuring Range: 5 InH2O to 50 PSI (12.5 to 3450 mbar)
  • Measuring Resolution:
    BURST: 0.01 psi (0.3 InH2O) or 0.7 mbar
    LEAK: (Pressure Decay): 0.001 psi (0.03 InH2O) or 0.07 mbar)
  • Communication (I/O): USB Type A (x2), VGA D sub 15, Monitor
    Network LAN (RJ-45), DB9 – Serial RS-232,
    USB Slave for PC, Type B
  • Calibration: NIST Traceable
  • Peripheral I/O: 8 Opto Outputs, 8 Inputs, 3 Digital I/O

 

Standards

  • ASTM F1140
  • ASTM F2054
  • ASTM F2095

 

    Företagsnamn (obligatorisk)

    Ditt namn (obligatorisk)

    Telefonnummer (obligatorisk)

    Din epost (obligatorisk)

    Ditt meddelande

    GDPR Compliance


      Företagsnamn (obligatorisk)

      Ditt namn (obligatorisk)

      Telefonnummer (obligatorisk)

      Din epost (obligatorisk)

      Ditt meddelande

      GDPR Compliance