Sheet Metal Testing Machine, Model 200

The Lacquer and Paint Testing Machine, Model 200, is a bench-mounted unit with a cast iron machine body and a cylindrical test head. It is used for the ERICHSEN CUPPING TEST on coated sheet metal, with a tensile strength of 400 N/mm², up to 1.25 mm thick and from 70 – 90 mm wide.

PDF

Kategori:

Beskrivning

Sheet Metal Testing Machine

Model 200

The Sheet Metal Testing Machine, Model 200, provides a means to measure the drawing
quality of sheet metal with very little effort. By establishing the quality of material which
is still just satisfactory for producing a particular drawn work-piece the lowest cost material
suitable for the part can be established. The standardized ERICHSEN Cupping Test is in this
way useful for the Purchasing Department, as part of an order specification.
The surface grain size is shown up clearly on the tip of the bulge produced in the Cupping Test
No special skills are required to operate the machine. Anybody can use it after instruction.

 

Key Features

  • Drawing force of up to 30 kN and sheet holder
    adjustable to achieve a constant force of 10 kN
  • Digital display to 1/10 mm accuracy
  • For the determination of drawing quality of sheet
    and strip metal on coated sheet metal, with a
    tensile strength of 400 N/mm², up to 1.25 mm
    thick and from 70 – 90 mm wide.

 

Standards

  • ISO 1520
  • DIN EN ISO 1520
  • SIS 1841 77
  • BS 3900:E4
  • NF T 30-019

 

Including

  • The testing machine including one test tool according
    to BS 3900 : Part E4, DIN EN IS0 1520, ISO 1520,
    DIN 53 156, SIS 18 41 77 and
    NF T 30-019 is precision made


    Företagsnamn (obligatorisk)

    Ditt namn (obligatorisk)

    Telefonnummer (obligatorisk)

    Din epost (obligatorisk)

    Ditt meddelande


      Företagsnamn (obligatorisk)

      Ditt namn (obligatorisk)

      Telefonnummer (obligatorisk)

      Din epost (obligatorisk)

      Ditt meddelande