Erichsen Sheet Metal Testing Machine
This sheet testing machine is very well suited for testing materials with mid-range sheet thickness (from 0.1 to approx. 3.0 mm). It is preferred by sheet metal manufacturing/processing companies for carrying out fast and reliable quality control. ERICHSEN cupping tests on all ferrous and non-ferrous metals can be carried out using the Model 102. If the appropriate test tools are used, tests can also be carried out in accordance with Olsen specifications (which predominate in the USA).
The machine consists of a sturdy sheet metal housing into which the test aggregate (test cylinder
with work piston, sheet holder piston) and the test tools as well as the hydraulic system are integrated.
The emergency-stop switch is located on the control panel next to the touch panel, which starts the
automatic menu navigation. The two control valves for the drawing and sheet holding force adjustment
are user-friendly mounted in front of the housing.
When carrying out the ERICHSEN Cupping Test,
the sheet metal specimen in the form of strip is inserted into the test cylinder and centralised by
locating diagonally. The sheet holder force of e.g. 10 kN in accordance with DIN EN ISO 20482 is
adjusted using a special regulating valve, and the actual cupping process is initiated by selecting the
from the test specification required drawing speed on the speed regulator.
Since the testing machine is equipped with the function ”automatic stop at specimen failure” the
forward speed is automatically stopped when the crack occurs, so that in any case an objective test
result is achieved. The ERICHSEN cupping value is displayed with an accuracy of 0.01 mm on the touch
When carrying out the Bore Expanding Test (KWI) the initial bore (in accordance with the dimensions of
the tools, i. e. normally 7.5 mm or 12 mm) is applied to the sheet metal specimen by drilling and reaming.
Afterwards this initial bore is expanded until a crack appears.
- ISO 1520
- ISO 8490
- EN 14-58
- EN 14-67
- EN ISO 20482
- JIS Z-2247