Purpose and Application

The UNICOATER 409 is a budget-priced, motor-driven film applicator for defined and reproducible application
of coating materials on very different plain substrates. Irregularities and inaccuracies inevitable when applying
films by hand, are avoided using the UNICOATER 409. This results in the following important advantages:

• An even and reproducible film thickness over the whole surface
• The possibility to produce very quickly a large number of identical samples.

Accessories

The user can adapt the UNICOATER 409 to the various
application requirements using the appropriate accessories
available:
• Flexible foam/rubber/melinex bed (recommendable for
spiral film applicators)
• Vacuum suction plate made of aluminium
• Vacuum suction pump
• A variety of film applicators:

• film applicator according to BIRD, Model 284
• film applicator BAKER 286
• film applicator system Wasag, model 288, for film widths of 80, 120, 180 or 230 mm
• spiral film applicator, model 358, for film widths of 80, 150 or 220 mm
• quadruple film applicator, model 360, for film widths of 13, 40 or 60 mm
• film applicator MULTICATOR 411, for film widths of 80, 150 or 220 mm
• levelling test blade and sag tester, model 419
• staggered-gap film applicator acc. to Krause, model 421 I, for 10 films each 20 mm wide
• staggered-gap film applicator acc. to Krause, model 421 II, for 6 films each 35 mm wide
  wire bars